Main public logs

Combined display of all available logs of dissonant.dev wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

19:18, 20 January 2025 Uart talk contribs created page Mainline:Broadcom Kona/Power Manager (Created page with "* Base address: <code>0x35010000</code> <span id="revisions"></span> == Revisions == There exist two revisions of the Power Manager: REV0 (capri) and REV2 (hawaii, java). Here is a list of known differences: * A second set of voltage controllers is introduced in REV02. ** To go with the second VO, a second sequencer command bank is introduced. * A new i2c command, <code>PWRMGR_I2C_APB_READ_OFFSET</code>, is introduced in REV02. This register contains i2c data and i2c...")
19:16, 20 January 2025 Uart talk contribs created page Mainline:Broadcom Kona/Pin control (PADCTRL) (Created page with "The pin controller in the BCM21664/BCM23550 appears to be ''somewhat'' similar to BCM28155, judging by the mainline driver. * BCM21664 has '''155''' pins; each pin can also have '''6''' functions. * BCM28155 has '''268''' pins; each pin can also have '''4''' functions. The downstream pinmux driver is located at <code>arch/arm/plat-kona/pinmux.c</code>, with per-platform settings defined in <code>arch/arm/mach-{codename}/{codename}_pinmux.c</code>. These files also cont...")
19:10, 20 January 2025 Uart talk contribs created page Mainline:Broadcom Kona/PMIC (BCM5905x) (Created page with "== Revisions == BCMPMU_59054_ID is ID for 59054 BCMPMU_59054A1_ANA_REV refers to A1 which has ACLD, A0 does not == Downstream driver notes == * The downstream driver used is BCM59xxx, which despite the name is only for the BCM59054 ** In the tree there are also drivers for BCM59056, a handful of other PMUs including BCM59055, and BCM590xx (which confusingly is '''not''' the same as BCM59xxx). * The whole driver is fragmented as it's an MFD device, but the most import...")
19:03, 20 January 2025 Uart talk contribs moved page Mainline:OnyxGo6 to Mainline:Onyx Go 6 without leaving a redirect
19:03, 20 January 2025 Uart talk contribs created page Mainline:OnyxGo6 (Created page with "This '''root page''' groups together various notes related to mainlining the ONYX BOOX Go 6, hereafter referred to as the Onyx Go 6. Category:Mainline Category:Device == Subpages == {{subpages}}")
19:00, 20 January 2025 Uart talk contribs created page Mainline:Broadcom Kona/Clocks (import from my personal docs)
17:58, 20 January 2025 Uart talk contribs created page Mainline:Broadcom Kona (Created page with "This '''root page''' connects pages for reverse-engineering of Broadcom Kona SoCs (with a focus on the BCM21664/BCM23550.) For more information, see [https://github.com/bcm-kona-mainline/ bcm-kona-mainline on GitHub]. Category:Mainline Category:SoC == Subpages == {{Subpages}}")
17:57, 20 January 2025 Uart talk contribs created page Template:Subpages (Created page with "<noinclude> <templatedata> { "params": {}, "description": "List subpages of the page.", "format": "block" } </templatedata> </noinclude><includeonly>{{Special:PrefixIndex/{{FULLPAGENAME}}|hideredirects=yes}}</includeonly>")
17:50, 20 January 2025 Uart talk contribs created page Mainline:Broadcom Kona/Timers (Created page with "The Kona platform has three timers: * HUB/AON * Slave/Peripheral * (BCM23550 only) Core The driver for the timers is split up into three files: * <code>arch/arm/plat-kona/kona_timer.c</code> * <code>arch/arm/plat-kona/timer.c</code> * <code>arch/arm/plat-kona/localtimer.c</code> - setup for the local tick timer (local, I assume, means "CPU-local" - meaning each channel belongs to a different CPU core) All timers use the same driver. == Timer operation == Each timer...")
15:21, 20 January 2025 Uart talk contribs created page Mainline (Created page with "Mainline pages contain information regarding mainlining various devices; usually these pages also contain general research done on these devices and their chipsets.") Tag: Visual edit: Switched