MediaWiki API result
This is the HTML representation of the JSON format. HTML is good for debugging, but is unsuitable for application use.
Specify the format parameter to change the output format. To see the non-HTML representation of the JSON format, set format=json.
See the complete documentation, or the API help for more information.
{
"batchcomplete": "",
"continue": {
"lecontinue": "2025-01-31 09:33:12+00|21",
"continue": "-||"
},
"query": {
"logevents": [
{
"logid": 31,
"ns": 3000,
"title": "Mainline:Broadcom Kona/USB PHY (HSOTGCTRL)",
"pageid": 26,
"logpage": 26,
"revid": 91,
"params": {},
"type": "create",
"action": "create",
"user": "Knuxify",
"timestamp": "2025-03-09T10:33:50Z",
"comment": "Created page with \"'''HSOTGCTRL''' is the USB2 PHY used in Broadcom Kona chips. == MDIO == MDIO most likely stands for [https://en.wikipedia.org/wiki/Management_Data_Input/Output Management Data Input/Output], a PHY management interface used primarily for Ethernet PHYs. While there is a standard for Ethernet MDIO registers, the USB MDIO does not appear to follow it, instead using its own values. Like the Ethernet MDIO, however, both the addresses and values are 16-bit. MDIO read/write r...\""
},
{
"logid": 30,
"ns": 3000,
"title": "Mainline:Broadcom Kona/BCM590xx/PONKEY",
"pageid": 25,
"logpage": 25,
"revid": 89,
"params": {},
"type": "create",
"action": "create",
"user": "Knuxify",
"timestamp": "2025-02-19T09:16:09Z",
"comment": "Created page with \"The BCM590XX PMU can handle a power-on key (the responsible section is nicknamed PONKEY). == Key press detection == When a key is pressed, the internal IRQ for a key press is raised; when it is released, the internal IRQ for a key release is raised. A driver can interpret these IRQs to toggle a key on/off (in downstream, it's wired up to <code>KEY_POWER</code> by default. === Debounce interval === A debounce interval can be configured independently for button press a...\""
},
{
"logid": 29,
"ns": 2,
"title": "User:MLXProjects",
"pageid": 0,
"logpage": 0,
"params": {
"userid": 3
},
"type": "newusers",
"action": "create2",
"user": "Knuxify",
"timestamp": "2025-02-11T11:40:37Z",
"comment": "requested via email"
},
{
"logid": 28,
"ns": 8,
"title": "MediaWiki:Common.css",
"pageid": 24,
"logpage": 24,
"revid": 78,
"params": {},
"type": "create",
"action": "create",
"user": "Knuxify",
"timestamp": "2025-02-07T14:48:34Z",
"comment": "Created page with \"/* CSS placed here will be applied to all skins */ table.sticky-header thead { \tposition: sticky; }\""
},
{
"logid": 27,
"ns": 3000,
"title": "Mainline:Broadcom Kona/Pin control (PADCTRL)/BCM21664 pins",
"pageid": 23,
"logpage": 23,
"revid": 76,
"params": {},
"type": "create",
"action": "create",
"user": "Knuxify",
"timestamp": "2025-02-07T14:46:51Z",
"comment": "Created page with \"This page contains a list of pinctrl pins on the BCM21664/BCM23550 PADCTRL. {| class=\"wikitable sortable sticky-header\" |+ Caption text |- ! Pin name ! alt1<br><code>0b000</code> ! alt2<br><code>0b001</code> ! alt3<br><code>0b010</code> ! alt4<br><code>0b011</code> ! alt5<br><code>0b100</code> ! alt6<br><code>0b101</code> |- ! ADCSYN | GPEN09 | RESERVED | RESERVED | RESERVED | GPIO36 | RESERVED |- ! BATRM | BATRM | RESERVED | RESERVED | RESERVED | GPIO30 | RESERVED |-...\""
},
{
"logid": 26,
"ns": 6,
"title": "File:Generate-dump-diff output example.png",
"pageid": 21,
"logpage": 21,
"revid": 64,
"params": {
"img_sha1": "e53sqcxtpun9a39cyqhxkavf1a5097w",
"img_timestamp": "2025-02-04T06:48:13Z"
},
"type": "upload",
"action": "overwrite",
"user": "Knuxify",
"timestamp": "2025-02-04T06:48:13Z",
"comment": ""
},
{
"logid": 25,
"ns": 3000,
"title": "Mainline:Broadcom Kona/Introduction",
"pageid": 22,
"logpage": 22,
"revid": 63,
"params": {},
"type": "create",
"action": "create",
"user": "Knuxify",
"timestamp": "2025-02-04T06:47:38Z",
"comment": "Created page with \"The following page is a general introduction to the Broadcom Kona platform and getting started with mainlining. == Chip introduction == '''Broadcom Kona''' is a series of chips primarily marketed for mobile use, released between 2012 and 2013. It comprises of the following chips: * BCM28145/BCM28155 (Capri) * BCM21654 (Rhea) * BCM21663/BCM21664 (Hawaii) * BCM23550 (Java) These chips all share similar components, with a similar internal register layout. They can be gr...\""
},
{
"logid": 24,
"ns": 6,
"title": "File:Generate-dump-diff output example.png",
"pageid": 21,
"logpage": 21,
"revid": 62,
"params": {},
"type": "create",
"action": "create",
"user": "Knuxify",
"timestamp": "2025-02-04T06:43:37Z",
"comment": ""
},
{
"logid": 23,
"ns": 6,
"title": "File:Generate-dump-diff output example.png",
"pageid": 21,
"logpage": 21,
"revid": 62,
"params": {
"img_sha1": "nc97cuqdkv69a7g1rhncvoh71sco7iq",
"img_timestamp": "2025-02-04T06:43:37Z"
},
"type": "upload",
"action": "upload",
"user": "Knuxify",
"timestamp": "2025-02-04T06:43:37Z",
"comment": ""
},
{
"logid": 22,
"ns": 3000,
"title": "Mainline:Broadcom Kona/BCM590xx/Interrupts",
"pageid": 20,
"logpage": 20,
"revid": 61,
"params": {},
"type": "create",
"action": "create",
"user": "Knuxify",
"timestamp": "2025-01-31T18:30:32Z",
"comment": "Created page with \"The BCM590xx PMIC exposes a series of interrupts. This page describes the operation of these interrupts. == Interrupt overview == The BCM59054 has '''128 IRQs'''; the BCM59056 has '''64 IRQs'''. On both chips, interrupt handling is the same. === Interrupt masking === Interrupts can be masked/unmasked by writing the relevant bit to <code>INTxMSK</code> registers. A value of <code>0</code> indicates that the interrupt is masked; a value of <code>1</code> indicates that...\""
}
]
}
}